The FITEL® S152 Version 2 Fusion Splicer is an obvious choice for low cost field splicing equipment. The Active V-Groove Technology used on the S152 v2 Fusion Splicer delivers low loss splices while helping to eliminate common Fixed V-groove splicing errors. By combining speed, precision, durability and portability in one unit, the S152 v2 Fusion Splicer ushers in an entirely new range of applications for active alignment splicing.

The  S152A  v2  Fusion  Splicer  canopy  design,  durable  metal  body frame and rubber protection corners provide robust protection, enabling use in demanding environments without compromising splicer performance. The S152A v2 Fusion Splicer is water resistant to IPX2 and dust resistant to IP5X. The battery is automaticity charged internally when connected to AC power even during operation.  The new illumination lamp lights up a wide area around the V-grooves and helps with operation in low light environments.

Equipped with a new alignment system that can save up to 20% on splicing time, the S152 v2 Splicer’s improved heating mechanism can also reduce protection sleeve shrink time by more than 30%. In addition, an incorporated USB 2.0 interface speeds PC communication and image/video transfer, while enhancing reliability.

While the S152 v2 Fusion Splicer is fast and durable, it continues the FITEL tradition of quality and excellence by delivering precise, accurate splices even under rigorous conditions in the field.

The S152 v2 Fusion Splicer is your logical choice for a wide range of uses including FTTX, LAN, backbone, enterprise, long-haul installations, data-center and/or OEM applications. It is also an excellent option for use in the conventional telecommunications industry, along with other industries (including oil and gas).


N/A Backbone Data center Enterprise FTTx LAN Long Haul OEM

Features and Benefits

  • Active V-groove design
  • Rugged and compact hand-held design
  • Internal battery charging
  • Fast splice and fast heating
  • Available for METRO/LAN/FTTx fibers
  • Splicer is compatible with Seikoh Giken and Diamond Splice-on-connector (SOC)
  • Easy maintenance
  • Easy software upgrade
  • Improved GUI
  • Easily exchanged fiber holder systems
  • Simplified program fusion and heater programming
  • PC interface software
  • Auto-start
  • Large memory
  • RoHS compliant

Single or Mass Fusion

N/A Single

Hand Held/Desktop

N/A Hand held

Fiber Alignment

N/A Active Clad

Fiber Types

N/A BIF/UBIF (ITU-T G.657) DSF (ITU-T G.653) MMF (ITU-T G.651) NZDSF (ITU-T G.655) SMF (ITU-T G.652)

Key Features

  • Active V-groove design helps to eliminate common fixed v-groove splicing errors
  • Rugged and compact hand held design for demanding environmental conditions
  • Fast splice (9 sec) with low loss and fast heating (25 sec) (By using semi-auto mode for splicing and pre-heating mode for heating)
  • 200 cycles (splicing & heating) with FITEL series battery configuration (By using 2-batteries, semi-auto mode for splicing and regular mode for heating)
  • Available for All METRO/LAN/FTTX fibers including ultra bend insensitive fibers (e.g. EZ-Bend® Fiber)
  • Splicer is compatible with the Seikoh Giken (Seikoh Giken is a registered trademark of SEIKOH GIKEN CO., LTD) and Diamond (Diamond is a registered trademark of Diamond SA) Splice-on-connector (SOC)
  • Easy maintenance - Toolless electrode replacement and mirror free alignment system
  • Easy Software upgrade via the Internet
  • Easily exchanged fiber holder systems (tight holder/fiber holder/SOC holder)
  • PC interface software provides for user management of splicing programs and results
  • Auto-start shrink sleeve oven feature
  • Auto-start splicing
  • Improved GUI to further enhance ease-of-use
  • Large memory for storing data (2,000 splice data) and image (100 images)
  • RoHS compliant

Under Tough Environments

N/A The S153A passed testing based on criteria below (Above tests were performed at Furukawa Electric Co. Labs, and do not guarantee that the machine will be undamaged under these conditions)
  • Drop Resistant - 76 cm drops from 5 different angles
  • Water Resistant - IPX2 rating drip proof (IPX2 rating drip proof means that the machine can be exposed to 3 mm/min drip from 4 different angles with 15º tilt for 2.5 min each and still functions)
  • Dust Resistant - IP5X rating dust proof (IP5X rating dust proof means that the machine can be exposed to dust particles with a diameter of 0.1 to 25 µm for 8 hours and still functions)

Drop Resistant

N/A 76 cm drops from 5 different angles

Water Resistant

N/A IPX2 rating drip proof

Dust Resistant

N/A IP5X rating dust proof

Kit Contents

N/A Value Kit Contains:
  • S153A-3-1 Splicer main body
  • S712S-250 250 µm Fiber holders
  • S943B Battery (Qty 1)
  • S958B Battery charger
  • S976A AC Adapter for fusion splicer
  • S977A AC Adapter for battery charger
  • S325A One-Step high precision cleaver
  • S969 Spare electrodes
  • HCC-01 Hard carrying case
  • VGC-01 V-groove cleaning brush
  • D5111 Electrode cleaning disk
  • FPF-01 Fiber prep fluid
  • FW-01 Fiber wipes
  • S211B Fiber stripper

Standard Package

  • Item Name - S152A v2 Main Body (Part Numbers - S153-A-A-0001) Quantity - 1
  • Item Name - Hard Carrying Case (Part Numbers - HCC-01) Quantity - 1
  • Item Name - Battery Pack (Depending on the package) (Part Numbers - S943B) Quantity - 0, 1 or 2
  • Item Name - Spare Electrodes (Part Numbers - S969) Quantity - 1 pair
  • Item Name - AC Adaptor for S152A v2 (Part Numbers - S976A) Quantity - 1
  • Item Name - AC Cable Cord (For S976A/S977A) Quantity - 1
  • Item Name - Electrode Sharpener (Part Numbers - D 5111) Quantity - 1
  • Item Name - Cleaning Brush (Part Numbers - VGC-01) Quantity - 1
  • Item Name - User Manual (Part Numbers - FTS - 351) Quantity - 1