function googleTranslateElementInit() { new google.translate.TranslateElement({pageLanguage: 'en', layout: google.translate.TranslateElement.InlineLayout.SIMPLE}, 'google_translate_element'); }
EZAccess™   |   Private Suite   |   Check Order Status   |   Change Region   |   Contact Us  Contact Us
Overview

OFS' 62.5 µm Laser Optimized Graded-Index Multimode Optical Fiber provides high performance over longer link lengths for Gigabit Ethernet and other high-speed transmission protocols. 62.5 µm Laser Optimized Fiber provides transmission distances up to 300 meters at 850 nm and up to 550 meters at 1300 nm. Fully compatible with your installed base of 62.5/125 micron multimode fiber, our 62.5 µm Laser Optimized Fiber allows for seamless upgrades of existing installations to 1 Gigabit per second (Gb/s) capability. The fiber meets or exceeds all performance requirements for Institute of Electrical and Electronics Engineers (IEEE) 802.3 Gigabit Ethernet standards.

Applications
Designed to carry the high bandwidth required by today’s network user, OFS’ laser optimized fibers maximize the performance of laser-based applications operating at 1 Gb/s transmission speeds. They are also completely compatible with all standard fiber optic network protocols including Fiber Distributed Data Interface (FDDI), Fast Ethernet and 155 Mb/s Asynchronous Transfer Mode (ATM). In Gigabit Ethernet networks, these laser-certified fibers offer outstanding performance with both conventional edge emitting lasers and Vertical Cavity Surface Emitting Lasers (VCSELs).

Features/Benefits:
  • Superior geometric tolerances and very low attenuation
  • Enables minimal connection loss and low cabled attenuation
  • Allows for Gigabit Ethernet operation up to 300 meters at 850 nm and up to 550 meters at 1300 nm
  • Designed for laser based Gigagit Ethernet applications while supporting legacy LED applications
Unit of Measure

Specifications

Performance Characteristic

N/A OM1+

Single-Mode or Multimode

N/A Multimode

Applications

N/A 1 Gb/s transmission speed networks 155 Mb/s Asynchronous Transfer Mode (ATM) networks Fast Ethernet networks Fiber Distributed Data Interface (FDDI) networks

Bend Performance

N/A Standard

Physical Characteristics

Clad Diameter

N/A 125 ± 1.0 µm

Clad Non-Circularity

N/A ≤ 1 %

Core/Clad Concentricity Error (Offset)

N/A ≤ 1.0 µm

Coating-Clad Concentricity Error (Offset)

N/A ≤ 8 µm

Tensile Proof Test

N/A 100 kpsi0.69 GPa

Standard Reel Lengths

N/A 2.2 to 8.8 km

Optical Characteristics

Macrobend Attenuation

N/A
Macrobend Attenuation 850 nm 1300 nm
100 turns on a 75 mm mandrel≤ 0.5 dB ≤ 0.5 dB

Zero Chromatic Dispersion Wavelength (λ0)

N/A 1320 to 1365 nm

Zero Chromatic Dispersion Slope (S0)

N/A ≤ 0.001 x (1458 – λ0) ≤ 0.11 ps/nm2-km (1320 ≤ λ0 ≤ 1348 nm) (1348 ≤ λ0 ≤ 1365 nm)

Environmental Characteristics (At 1310, 1550 & 1625 nm)

Dynamic Fatigue Stress Corrosion Parameter (nd)

N/A ≥ 18

Ordering Information

Order From Location

N/A 1 Brightwave Blvd.Carrollton, GA 30117, USA 1-770-798-5555 from outside the USA 1-888-fiberhelp (1-888-342-3743) from inside the USA CARROLLTON LOCATION