• Appropriate for virtually any indoor/outdoor application
• Indoor ready with compliant flame ratings
• Broad cable operating temperature range -40 °C to +70 °C
• Totally gel-free, waterproof cable helps save on deployment time and expense
• UV protective outer jackets ideal for outdoor use
• Compact design facilitates easy installation in tight spaces
• Superior tight buffering over a proprietary coating for a "connector-ready" cable (no entrance splicing needed)
• Excellent choice for cell site towers, wind farm and other industrial applications
• Dual Rated (LSZH + UL 1666) 2 to 12 fibers; Riser cables available with 18 to 24 fibers and Plenum 2 to 144 fibers

• Ultra low-loss solution for longer reaches and improved network performance resulting in reduced operational and re-transmit costs
• Superior performance in the C- and L- Bands as a direct result of lower bend losses in the fiber in the 1530 nm to 1625 nm regions
• Visual color identification for high speed paths with its distinctive blue jumper outer jacket
• Fully compatible with Non-Zero Dispersion Fiber (NZDF) and all single-mode fiber systems
• Meets or exceeds all industry standards for single-mode fiber performance
• Available with standard polish and angled polish connectors
• Combines full-spectrum low-loss performance with very low bending loss

• Available in 3.0 and 4.8 diameter cordages, as indoor/outdoor, riser, plenum, or low-smoke, zero-halogen constructions
• Less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
• Solid construction fiber with macrobending performance far better than ITU G.657.B3 requirements
• Backwards compatible with installed G.652.D fibers
• Available as single or double ended SCA terminated cables with 0.25 dB insertion loss and -55 dB return loss
• Ruggedized cords designed to allow common stapling methods
• Ideal for in-residence wiring and difficult installation routes in MDU overbuilds
• No extra steps to install bend limiters, conduits, or raceways
• Conforms to building; slack fits in small storage spaces
• Fast, easy, low-loss splicing to G.652.D fiber with existing core and clad aligned splice equipment

• Preassembled shelves in multiple configurations
• OFS ganged adapter sets maximize footprint
• Includes adapter panels for 48 LC, 24 SC or 24 ST terminations
• 19-inch frame mounting
• Fits 1U rack space (17.2" h x 17" w x 8" d)
• Mounting bracket available for ETSI frames
• Clear plastic shelf cover protects fibers
• Two 3" fiber spools
• One compression grommet
• Labels
• Optional extender brackets for 23" frame

Features:

• RoHS compliant
• Half the size of standard connectors
• RJ-style push-pull housing
• One-piece design •Polarized
• Pull-proof for jumper
• PC finish
• Anti-snag latch for jumper and BTW
• Standards compliant
• Removable clips for both simplex and duplex connectors
• Pre-radiused connectors available for minimal polish
• Angled and short boots available for 1.6/2.0 mm cordage applications

Benefits:

• Doubles density
• Disengages easily in dense spaces
• Helps assure high repeatability
• Maintains transmit/receive direction
• Maintains optical contact
• Helps minimize transmission problems
• Improves durability and reduces crossconnect rearrangement effort
• Pre-radiused LCs reduce installation time and costs of consumables

• Rapid Field Installation
• Allows for Direct Cable Feed When Applicable
• On Frame Splicing
• Indoor/Outdoor Fiber Management
• Use in controlled environments or OSP cabinets
• Frame Mount in 23" or 19"
• Universal frame/wall mount brackets included
• Fiber Management Rings included
• Front and rear door access
• Key Lock Door Available
• Combine 7, and 9 inch shelves
• 17" W x 11.5" D
• Fiber Jumper Management

• Optimized for air-blown, microduct installations, including networks in heavily congested metropolitan areas
• Lower deployment costs with fast and easy installation
• Reduced diameter and high fiber density ratio maximize capacity in limited spaces
• Deferred build costs with fiber deployed only as needed
• DryBlock design for quicker, cleaner cable preparation for jointing
• Meets Telcordia Technologies GR-20 standards for environmental and mechanical performance
• 300 pound/1335 N Maximum Rated Cable Load (MRCL)
• Availble with OFS application-specific fibers, including AllWave® Zero Water Peak (ZWP) Single-Mode Fiber, TrueWave® RS Low Water Peak (LWP) Single-Mode Fiber and Multimode Fibers

• AccuDry Indoor/Outdoor Riser Rated Cable provides dependable, fast installation
• The assembly can eliminate or reduce field splicing using factory-mounted high-performance connectors
• Standard single fiber connectors plug in to standard SC or LC ports
• Faster, easier, reliable cable pull
• Flexible lightweight cable
• Pulling sock removable in less than 1 minute
• No fusion equipment or power needed
• Protective pulling sock rated at 100 lbs max tension
• Bulk cable tension max 300 lbs
• Compliant with relevant Telcordia, ICEA, IEEE 802(s), TIA, and IEC standards

• Proven all-dielectric loose tube construction for outstanding performance, reliability, and immunity to electromagnetic fields, eliminating the need for expensive cable shielding or grounding
• Fast, one-step installation using simple attachment hardware (without a pre-installed messenger) and normally without interrupting electrical service
• Integrated, torque-balanced aramid yarn strength elements for superior cable strength and stability
• A round cable profile that minimizes wind and ice loading for reduced cable sag and tensile forces on towers and support hardware
• Full qualification in accordance with applicable Telcordia Technologies, EIA/TIA, IEEE, and RDUP standards

• Industry-first, gel-free ADSS cable for cleaner, faster and less costly deployments
• Efficient, cost-effective solution for short cable spans ranging up to 1.150 feet (350 meters)
• Lighter weight, dry cable helps cut cable end preparation time
• Enables significant cost savings from the use of less costly attachment hardware
• Allows up to a 10% greater span length capability
• Fiber counts up to 144
• Single polyethylene outer jacket for fast, convenient cable preparation (suitable for distribution and low-voltage applications)
• Cleaner work environment helps support faster splicing with higher yields
• Small round profile minimizes wind and ice loading
• Environmentally-friendly cable helps reduce waste and the need for special cleaning solvents
• Single cable outer diameter for fiber counts of 2 to 60 for simplified hardware selection and splicing
• Available with OFS AllWave® Zero Water Peak (ZWP) Single-Mode, TrueWave® RS Low Water Peak (LWP) and multimode fibers
• Highly durable and reliable for short spans including FTTH deployments, distribution networks, direct use in ducts, aerial-to-duct transitions and aerial-to-underground installations

• Illumination Lamp
• Rugged and compact hand-held design
• Fast Splice and Fast Heating
• Simple Operation
• Splicer is compatible with Seikoh Giken and Diamond SOCs
• Internal battery charging
• Available for all METRO/LAN/FTTx fibers
• Easy maintenance
• Easy software upgrade
• Easily exchanged fiber holder systems
• PC interface software
• Auto-start
• Improved GUI
• Large memory
• RoHS compliant

• Active V-groove design
• Rugged and compact hand-held design
• Internal battery charging
• Fast splice and fast heating
• Available for METRO/LAN/FTTx fibers
• Splicer is compatible with Seikoh Giken and Diamond Splice-on-connector (SOC)
• Easy maintenance
• Easy software upgrade
• Improved GUI
• Easily exchanged fiber holder systems
• Simplified program fusion and heater programming
• PC interface software
• Auto-start
• Large memory
• RoHS compliant

• Field mountable connectors
• Jumpers: simplex, duplex, quad, angled connectors, hybrids
• Pigtails
• Connectorized cables
• Preterminated shelves
• Terminated angled SC connectors
• LIU and LGX panels
• Simplex and duplex adapters
• Attenuators
• Tools and consumable kits

• Splice tray holds either 40 mm single fusion splice sleeves or bare planar splitters
• Cable entries at the bottom of the enclosure
• Multiple panels for housing adapters
• Small size taking up minimal wall space
• Formed in plastic with high mechanical resistance providing protection for splices and terminations
• Can be installed in any vertical plan surface easily reducing installation time

• Nominal fiber OD 1258.0 µm
• Cable OD 0.9 mm BTW
• Insertion loss m, s 0.3 dB, 0.2 dB
• Return loss 44 dB
• Mating durability (insertion loss change after 500 reconnects) < 0.2 dB
• Temperature Stability (-40 °C to +75 °C)
• Insertion loss change < 0.3 dB
• Tip material zirconia

• Hands-free fiber pay-off operation
• Integrated spool axle for fiber storage
• Spool-and-Play functionality from the factory
• feet (15.24 meters) of integrated cable (a larger V-Linx Terminal is available for 300 feet (91 meters) applications)
• Parking adapters for units not in service
• Wall mountable onto multiple surfaces
• Highly compact design
• AllWave® FLEX ZWP Single-Mode Fiber enabled design
• Under area splice cable