The OFS FTTx Solution for Cell Sites (CS) is a passive, end-to-end FTTH solution optimized to bring fiber to cell sites faster and more efficiently than conventional offerings. The OFS FTTx Solution CS includes innovative, state-of-the-art components that can provide fast and easy installation with outstanding optical performance and reliability.
1 - 16 of 16 | Results Per Page | View |

Item #

Item Name


Features and Benefits

Sort by
PowerGuide® Fiber Optic Cables N/A PowerGuide® Fiber Optic Cables N/A ADSS Aerial FTTx N/A
  • Proven all-dielectric loose tube construction for outstanding performance, reliability, and immunity to electromagnetic fields, eliminating the need for expensive cable shielding or grounding
  • Fast, one-step installation using simple attachment hardware (without a pre-installed messenger) and normally without interrupting electrical service
  • Integrated, torque-balanced aramid yarn strength elements for superior cable strength and stability
  • A round cable profile that minimizes wind and ice loading for reduced cable sag and tensile forces on towers and support hardware
  • Full qualification in accordance with applicable Telcordia Technologies, EIA/TIA, IEEE, and RDUP standards
PowerGuide® ShortSpan DT Cable N/A PowerGuide® ShortSpan DT Cable N/A ADSS Aerial FTTx N/A
  • Industry-first, gel-free ADSS cable for cleaner, faster and less costly deployments
  • Efficient, cost-effective solution for short cable spans ranging up to 1.150 feet (350 meters)
  • Lighter weight, dry cable helps cut cable end preparation time
  • Enables significant cost savings from the use of less costly attachment hardware
  • Allows up to a 10% greater span length capability
  • Fiber counts up to 144
  • Single polyethylene outer jacket for fast, convenient cable preparation (suitable for distribution and low-voltage applications)
  • Cleaner work environment helps support faster splicing with higher yields
  • Small round profile minimizes wind and ice loading
  • Environmentally-friendly cable helps reduce waste and the need for special cleaning solvents
  • Single cable outer diameter for fiber counts of 2 to 60 for simplified hardware selection and splicing
  • Available with OFS AllWave® Zero Water Peak (ZWP) Single-Mode, TrueWave® RS Low Water Peak (LWP) and multimode fibers
  • Highly durable and reliable for short spans including FTTH deployments, distribution networks, direct use in ducts, aerial-to-duct transitions and aerial-to-underground installations
LC Connectors N/A LC Connectors N/A APC Cable Television Data Processing Networks Fiber-to-the-Home (FTTx) Local Area Networks Multimode Premises Distribution Singlemode Telecommunications networks N/A


  • RoHS compliant
  • Half the size of standard connectors
  • RJ-style push-pull housing
  • One-piece design •Polarized
  • Pull-proof for jumper
  • PC finish
  • Anti-snag latch for jumper and BTW
  • Standards compliant
  • Removable clips for both simplex and duplex connectors
  • Pre-radiused connectors available for minimal polish
  • Angled and short boots available for 1.6/2.0 mm cordage applications


  • Doubles density
  • Disengages easily in dense spaces
  • Helps assure high repeatability
  • Maintains transmit/receive direction
  • Maintains optical contact
  • Helps minimize transmission problems
  • Improves durability and reduces crossconnect rearrangement effort
  • Pre-radiused LCs reduce installation time and costs of consumables
S123 v2 Fusion Splicer N/A S123 v2 Fusion Splicer N/A Backbone FTTx LAN Long Haul N/A
  • Illumination Lamp
  • Rugged and compact hand-held design
  • Fast Splice and Fast Heating
  • Simple Operation
  • Splicer is compatible with Seikoh Giken and Diamond SOCs
  • Internal battery charging
  • Available for all METRO/LAN/FTTx fibers
  • Easy maintenance
  • Easy software upgrade
  • Easily exchanged fiber holder systems
  • PC interface software
  • Auto-start
  • Improved GUI
  • Large memory
  • RoHS compliant
S153 v2 Fusion Splicer N/A S153 v2 Fusion Splicer N/A Backbone Data center Enterprise FTTx LAN Long Haul OEM N/A
  • Active V-groove design
  • Rugged and compact hand-held design
  • Internal battery charging
  • Fast splice and fast heating
  • Available for METRO/LAN/FTTx fibers
  • Splicer is compatible with Seikoh Giken and Diamond Splice-on-connector (SOC)
  • Easy maintenance
  • Easy software upgrade
  • Improved GUI
  • Easily exchanged fiber holder systems
  • Simplified program fusion and heater programming
  • PC interface software
  • Auto-start
  • Large memory
  • RoHS compliant
SC Connectors N/A SC Connectors N/A Broadband/Cable TV (CATV) Competitve LEC (CLEC) Local Exchange Carrier (LAC) N/A
  • Field mountable connectors
  • Jumpers: simplex, duplex, quad, angled connectors, hybrids
  • Pigtails
  • Connectorized cables
  • Preterminated shelves
  • Terminated angled SC connectors
  • LIU and LGX panels
  • Simplex and duplex adapters
  • Attenuators
  • Tools and consumable kits
ST2 Fiber Optic Connectors N/A ST2 Fiber Optic Connectors N/A Cable-to-cable Cable-to-equipment N/A
  • Nominal fiber OD 1258.0 µm
  • Cable OD 0.9 mm BTW
  • Insertion loss m, s 0.3 dB, 0.2 dB
  • Return loss 44 dB
  • Mating durability (insertion loss change after 500 reconnects) < 0.2 dB
  • Temperature Stability (-40 °C to +75 °C)
  • Insertion loss change < 0.3 dB
  • Tip material zirconia
MiDia® FX PLUS Cable N/A MiDia® FX PLUS Cable N/A Duct FTTx N/A
  • Optimized for air-blown, microduct installations, including networks in heavily congested metropolitan areas
  • Lower deployment costs with fast and easy installation
  • Reduced diameter and high fiber density ratio maximize capacity in limited spaces
  • Deferred build costs with fiber deployed only as needed
  • DryBlock design for quicker, cleaner cable preparation for jointing
  • Meets Telcordia Technologies GR-20 standards for environmental and mechanical performance
  • 300 pound/1335 N Maximum Rated Cable Load (MRCL)
  • Availble with OFS application-specific fibers, including AllWave® Zero Water Peak (ZWP) Single-Mode Fiber, TrueWave® RS Low Water Peak (LWP) Single-Mode Fiber and Multimode Fibers
Blue Tiger® High-Performance Jumpers N/A Blue Tiger® High-Performance Jumpers N/A High-performance optical networks operating in the C- and L-Band Spectrums High-speed optical paths in central offices, point-of-presence locations (POPs) or equipment buildings Optical networks with multiple "pass through" nodes Service providers' high-performance DWDM traffic systems or digital video systems Service providers' networks carrying high traffic on a single fiber (> OC-48) N/A
  • Ultra low-loss solution for longer reaches and improved network performance resulting in reduced operational and re-transmit costs
  • Superior performance in the C- and L- Bands as a direct result of lower bend losses in the fiber in the 1530 nm to 1625 nm regions
  • Visual color identification for high speed paths with its distinctive blue jumper outer jacket
  • Fully compatible with Non-Zero Dispersion Fiber (NZDF) and all single-mode fiber systems
  • Meets or exceeds all industry standards for single-mode fiber performance
  • Available with standard polish and angled polish connectors
  • Combines full-spectrum low-loss performance with very low bending loss
AccuDry® Indoor/Outdoor Cable N/A AccuDry® Indoor/Outdoor Cable N/A Indoor Outdoor N/A
  • Appropriate for virtually any indoor/outdoor application
  • Indoor ready with compliant flame ratings
  • Broad cable operating temperature range -40 °C to +70 °C
  • Totally gel-free, waterproof cable helps save on deployment time and expense
  • UV protective outer jackets ideal for outdoor use
  • Compact design facilitates easy installation in tight spaces
  • Superior tight buffering over a proprietary coating for a "connector-ready" cable (no entrance splicing needed)
  • Excellent choice for cell site towers, wind farm and other industrial applications
  • Dual Rated (LSZH + UL 1666) 2 to 12 fibers; Riser cables available with 18 to 24 fibers and Plenum 2 to 144 fibers
SlimBox™ 12-Fiber Internal Use Wall Mount Module N/A SlimBox™ 12-Fiber Internal Use Wall Mount Module N/A Indoor wall mount environment N/A
  • Splice tray holds either 40 mm single fusion splice sleeves or bare planar splitters
  • Cable entries at the bottom of the enclosure
  • Multiple panels for housing adapters
  • Small size taking up minimal wall space
  • Formed in plastic with high mechanical resistance providing protection for splices and terminations
  • Can be installed in any vertical plan surface easily reducing installation time
EZ-Bend® Multifiber Drop Bundle N/A EZ-Bend® Multifiber Drop Bundle N/A Indoor/Outdoor N/A
  • Available in 3.0 and 4.8 diameter cordages, as indoor/outdoor, riser, plenum, or low-smoke, zero-halogen constructions
  • Less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
  • Solid construction fiber with macrobending performance far better than ITU G.657.B3 requirements
  • Backwards compatible with installed G.652.D fibers
  • Available as single or double ended SCA terminated cables with 0.25 dB insertion loss and -55 dB return loss
  • Ruggedized cords designed to allow common stapling methods
  • Ideal for in-residence wiring and difficult installation routes in MDU overbuilds
  • No extra steps to install bend limiters, conduits, or raceways
  • Conforms to building; slack fits in small storage spaces
  • Fast, easy, low-loss splicing to G.652.D fiber with existing core and clad aligned splice equipment
Pluggable Drop Cables for Cell Sites N/A Pluggable Drop Cables for Cell Sites N/A Indoor/Outdoor N/A
  • AccuDry Indoor/Outdoor Riser Rated Cable provides dependable, fast installation
  • The assembly can eliminate or reduce field splicing using factory-mounted high-performance connectors
  • Standard single fiber connectors plug in to standard SC or LC ports
  • Faster, easier, reliable cable pull
  • Flexible lightweight cable
  • Pulling sock removable in less than 1 minute
  • No fusion equipment or power needed
  • Protective pulling sock rated at 100 lbs max tension
  • Bulk cable tension max 300 lbs
  • Compliant with relevant Telcordia, ICEA, IEEE 802(s), TIA, and IEC standards
LGX® Fiber Optics Combination Shelves N/A LGX® Fiber Optics Combination Shelves N/A Indoor/Outdoor Fiber Management N/A
  • Rapid Field Installation
  • Allows for Direct Cable Feed When Applicable
  • On Frame Splicing
  • Indoor/Outdoor Fiber Management
  • Use in controlled environments or OSP cabinets
  • Frame Mount in 23" or 19"
  • Universal frame/wall mount brackets included
  • Fiber Management Rings included
  • Front and rear door access
  • Key Lock Door Available
  • Combine 7, and 9 inch shelves
  • 17" W x 11.5" D
  • Fiber Jumper Management
Fixed and Sliding 1U S-LIU/F-LIU Shelves N/A Fixed and Sliding 1U S-LIU/F-LIU Shelves N/A Manage both splices and terminations N/A
  • Preassembled shelves in multiple configurations
  • OFS ganged adapter sets maximize footprint
  • Includes adapter panels for 48 LC, 24 SC or 24 ST terminations
  • 19-inch frame mounting
  • Fits 1U rack space (17.2" h x 17" w x 8" d)
  • Mounting bracket available for ETSI frames
  • Clear plastic shelf cover protects fibers
  • Two 3" fiber spools
  • One compression grommet
  • Labels
  • Optional extender brackets for 23" frame
V-Linx™ Terminal Indoor and Outdoor N/A V-Linx™ Terminal Indoor and Outdoor N/A Storage Terminal System N/A
  • Hands-free fiber pay-off operation
  • Integrated spool axle for fiber storage
  • Spool-and-Play functionality from the factory
  • feet (15.24 meters) of integrated cable (a larger V-Linx Terminal is available for 300 feet (91 meters) applications)
  • Parking adapters for units not in service
  • Wall mountable onto multiple surfaces
  • Highly compact design
  • AllWave® FLEX ZWP Single-Mode Fiber enabled design
  • Under area splice cable
1 - 16 of 16 | Results Per Page | View |