function googleTranslateElementInit() { new google.translate.TranslateElement({pageLanguage: 'en', layout: google.translate.TranslateElement.InlineLayout.SIMPLE}, 'google_translate_element'); }
EZAccess™   |   Private Suite   |   Check Order Status   |   Change Region   |   Contact Us

The OFS FTTx Solution provides optimized, easily-deployed solutions for MDU environments. These solutions contain compact enclosures, cable assemblies and other connectivity components.

1 - 25 of 25 | Results Per Page | View |
1 

Item #

Item Name

Applications

Features and Benefits

Image

400 Series Wall Mount Unit - WMU2/4/8 N/A 400 Series Wall Mount Unit - WMU2/4/8 N/A FTTx N/A
  • WMU2 up to 24 LC, 24 SC or 16 ST®
  • WMU4 up to 48 LC, 48 SC or 32 ST
  • WMU8 up to 96 LC, 96 SC or 64 ST
  • Wall Mountable
  • Top & Bottom Cable Entry
  • Snap in panels either 2, 4 , or 8
  • Slack Storage Fiber Ratings
  • Snap in splice trays

AccuFlex® + Ribbon Cable N/A AccuFlex® + Ribbon Cable N/A FTTx N/A
  • Compact, flexible, round ribbon design for ease of deployment
  • Offers increased durability and enhanced compression resistance
  • Outstanding microbend performance
  • Available in plenum-rated designs and dual-rated, non-halogen/LSZH designs
  • Ideal for us in high-bandwidth applications and optimized for MPO/MPX connectors
  • Complies with Telcordia, ICEA, NEC, ANSI-FDDI, IEEE and TIA standards; meets GR-409 and ICEA pull strength requirements for vertical backbone use
  • Meets UL 1666 for riser applications; meets NFPA 262 and UL 910 for plenum
  • RoHS compliant and free of heavy metals
  • Available with OFS AllWave® FLEX+ Zero Water Peak (ZWP) Single-Mode Fiber, AllWave® FLEX MAX ZWP Bend-Optimized Single-Mode Fiber, LaserWave® FLEX Multimode Fibers and other multimode fibers

AccuMax™ Plenum Cable N/A AccuMax™ Plenum Cable N/A Backbone FTTx N/A
  • Available in riser, plenum and dual-rated, low-smoke zero halogen (LSZH) rated designs
  • Robust backbone cable withstands typical indoor abuse
  • Eases installation in space-constrained areas
  • Superior tight buffering over a proprietary coating ensures minimal termination effort
  • Enables faster, easier cable preparation and installation, for reduced installation time and cost
  • Highly versatile and suitable for use in a wide range of systems and applications
  • Cabled fiber counts of 2 to 144
  • Smaller and lighter 18- and 24-fiber single-tube designed reduce installation preparation time
  • Cable outer jacket color-coded to easily identify fiber type
  • Hybrid composite cables with multiple fiber types available
  • MEets or exceeds ICEA S-83-596 and Telcordia GR-409 Standards
  • UL® or ETL Listed and tested per OFNR or OFNP
  • Avaialble with OFS AllWave® FLEX+ Zero Water Peak (ZWP) and LaserWave® FLEX Multimode Optical Fiber and other fiber types

Connectorized MiniCord® Riser Rated Breakout Cables N/A Connectorized MiniCord® Riser Rated Breakout Cables N/A Equipment rooms FTTx Indoor N/A
  • Factory Installed & Tested Conditions
  • RoHS compliant and UL Listed
  • Small 1.6 mm cordage speeds stripping and termination process
  • High reliability
  • Wide range of fibers types and connector options
  • Compact Package

EZ-Bend® 3.0 Cable N/A EZ-Bend® 3.0 Cable N/A FTTx In-Home MDU N/A
  • 3.0 diameter ruggedized simplex cordage
  • Less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
  • Solid construction fiber with macrobending performance with ITU G.657B3 requirements
  • Backward compatible with installed G.652D fibers
  • Available in alternative colors upon request
  • Conform to UL® Riser and Plenum fire ratings
  • Compliant with Telcordia 409 & ICEA S-83-596 requirements
  • Featuring EZ-Bend Optical Technology, a breakthrough developed by OFS Labs
  • "Copper-like" installation process
  • Faster, easier installation
  • Compact, installation and storage
  • Fast, easy low-loss splicing
  • Familiar, standard connector termination
  • Familiar connector endface cleaning
  • MDU and in-home optimized
  • Greener Solution

EZ-Bend® 3.0 Ruggedized Assemblies N/A EZ-Bend® 3.0 Ruggedized Assemblies N/A Indoor/Outdoor MDU and in-home wiring applications N/A
  • Available in 3.0 diameter cordage in an indoor/outdoor construction
  • Less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
  • Solid construction fiber with macrobending performance far better than ITU G.657.B3 requirements
  • Backward compatible with installed G.652.D fibers
  • Available as single or double ended SCA terminated cables with 0.15 dB Mean Loss (single fiber constructions)
  • Also available as boxed cable for splicing that can be easily managed by a single technician
  • Staple friendly
  • MDU and In-Home Optimized
  • Faster, easier installation
  • Compact installation and storage
  • Fast, easy low-loss splicing

EZ-Bend® 4.8 & 3.0 Ruggedized Cables N/A EZ-Bend® 4.8 & 3.0 Ruggedized Cables N/A FTTx Indoor/Outdoor N/A
  • 3.0 and 4.8 ruggedized cordage
  • Less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
  • Less than 0.3 dB macrobending attenuation at 1550 nm when subjected to MDU Simulation Test called out by Verizon TPR.9424 FOC Document
  • Sold construction fiber with macrobending performance far better than ITU G.657B requirements
  • Backward compatible with installed G.652D fibers
  • Conform to UL® Riser and Plenum fire ratings
  • Compliant with Telcordia 409 & ICEA S-83-596 requirements
  • Dry water-blocked core to protect against water ingress
  • Reinforced solid jacket construction naturally limits cable bending to control macrobending attenuation and protect fiber reliability
  • Staple friendly
  • MDU and In-Home Optimized
  • Faster, easier installation
  • Compact installation and storage
  • Fast, easy low-loss splicing
  • Familiar, standard connector termination
  • Familiar connector endface cleaning
  • Greener solution

EZ-Bend® 4.8 Toneable Cable N/A EZ-Bend® 4.8 Toneable Cable N/A FTTx In-Home MDU N/A
  • 4.8 mm diameter ruggedized toneable indoor/outdoor cordage
  • Less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
  • Less than 0.3 dB macrobending attenuation at 1550 nm when subjected to MDU Simulation Test called out by Verizon TPR.9424 FOC Document
  • Solid construction fiber complies with ITU G.657B requirements for macrobending performance
  • Backward compatible with installed G.652D fibers
  • Conforms to UL® CL2R-OF fire rating
  • Compliant with Telcordia 409 & ICEA S-83-596C and S-104-696 requirements
  • Dry water-blocked core to protect against water ingress
  • Reinforced solid jacket construction naturally limits cable bending to control macrobending attenuation and protect fiber reliability
  • Integrated toning wire
  • Fast, easier handling
  • Compact installation and storage
  • Color options
  • Streamlined clack storage
  • Fast, easy low-loss splicing
  • Familiar, standard connector termination
  • Greener solution

EZ-Bend® Factory Terminated Assemblies N/A EZ-Bend® Factory Terminated Assemblies N/A FTTx In-Home MDU N/A
  • Available in 4.8 and 3.0 diameter cordages, as indoor/outdoor, riser, plenum, or low-smoke, zero-halogen constructions
  • Less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
  • Solid construction fiber with macrobending performance far better than ITU G.657B requirements
  • Backward compatible with G.652D fibers
  • Available as single or double ended SCA terminated cables with 0.15 dB Mean Loss (single fiber constructions)
  • Also available as boxed cable for splicing than can be easily managed a single technician
    • Insertion Loss: 0.5 dB
    • Return Loss: -65 dB
    • Mating Durability: 100
  • "Copper-like" installation process: can be routed around corners using familiar copper service wire practices
  • Fast, easier installation: no extra steps to install bend limiters, conduits, or raceways
  • Compact installation and storage: conforms to building, slack fits in small storage spaces
  • Fast, easy, low-loss splicing to G.652D fiber with existing core and clad aligned splice equipment
  • MDU and in-home optimized: Ideal for in-residence wiring and difficult installation routes in MDU overbuilds

EZ-Bend® Multifiber Drop Bundle N/A EZ-Bend® Multifiber Drop Bundle N/A FTTx Indoor/Outdoor MDU N/A
  • Available in 3.0 and 4.8 diameter cordages, as indoor/outdoor, riser, plenum, or low-smoke, zero-halogen constructions
  • Less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
  • Solid construction fiber with macrobending performance far better than ITU G.657B requirements
  • Backward compatible with installed G.652.D fibers
  • Available as single or double ended SCA terminated cables with 0.25 dB insertion loss and -55 dB return loss
  • Staple friendly
  • MDU and In-Home optimized
  • Faster, easier installation
  • Compact installation and storage
  • Fast, easy low-loss splicing

HomeRun MDU Cabling System N/A HomeRun MDU Cabling System N/A In-Home MDU N/A
  • EZ-Bend Fiber exhibits less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
  • EZ-Bend Fiber or AllWave® ZWP FLEX+ Fiber is fully splice-compatible with the existing installed base of fibers
  • 100% Factory Tested
  • Color-coded subunits provide easy fiber identification
  • Small 1.6 mm cordage speeds stripping and termination process
  • Eliminates need for and loss of riser to hallway fiber connections
  • High Reliability
  • Installation in space-constrained hallways
  • RoHS compliant; free from heavy metals and environmentally-friendly
  • UL® Listed Riser per UL® 1666 Riser Flame Test and CSA certified per OFN FT4

InvisiLight® Optical Solution N/A InvisiLight® Optical Solution N/A FTTx Indoor MDU N/A

Advantages:

  • Independent plug-and-play installation
  • Simple and flexible versus traditional methods
  • Faster time to service and revenue turn up
  • No expensive retraining of staff
  • Optical fiber surpasses G.657.B3 standards
  • Décor, wall, corner and obstacle friendly
  • Easy to reposition or remove

Mechanical SC Connectors N/A MOCSC and MOCSCA Mechanical SC Connectors N/A CLEC Data Centers FTTx LEC MDU MSO/Broadband/CATV Municipal Networks N/A
  • Fully compatible with other SC connectors
  • Reduces the need for slack storage
  • Reduces assembly time
  • No polishing or epoxy required
  • Easy instructions
  • Useful in multiple applications

M-Pack™ Plenum Interconnect Cordage N/A M-Pack™ Plenum Interconnect Cordage N/A FTTx MDU N/A
  • Small diameter, lightweight cordage allows ease of deployment and termination
  • Ideal for us in high-density, high-bandwidth applications and optimized for use with multi-fiber connectors
  • RoHS compliant and environmentally friendly free of heavy metals and polybrominated fire retardants
  • Available in fiber counts from 2 to 48 (Plenum-Rated) and 2 to 12 (LSZH-Rated); also offered in an Indoor/Outdoor Simplex LSZH design. Ask for details
  • Plenum cordage meets requirements of NFPA 262 OFNP flame and smoke performance; LSZH cordage meets IEC 60332-3C standards
  • Available with OFS' industry-leading LaserWave® Multimode Fibers and other fibers

MPO Fanouts N/A MPO Fanouts N/A

Reliable high-density interconnections for:

  • Equipment Interconnections
  • Telecommunications networks
  • Broadband/CATV networks
  • Data communications networks, including high-bandwidth equipment
  • Interconn
N/A
  • Ultra-small and durable fibers, ideal for a variety of installation environments:
  • Reliable high-density, high-performance interconnections
    • Increases fiber density on fiber shelves and faceplates
    • Improves and simplifies fiber routing
    • Decreases fiber management space
  • Telcordia GR-1435-CORE tested
  • ANSI/TIA/EIA-604-5-199 FOCIS 5 compliant
  • Quick and easy connection with push-on/pull-off latching mechanism
  • Low insertion loss and reflectance
  • High-speed application support
  • Solution-based engineering support to meet all fiber routing requirements
    • ?Assistance for unique designs and configurations
  • OEM solutions for special applications

OFS Multi-Dwelling Unit (MDU) Solutions N/A OFS Multi-Dwelling Unit (MDU) Solutions N/A FTTx MDU N/A *Features vary based on solution
S123 v2 Fusion Splicer N/A S123 v2 Fusion Splicer N/A Backbone FTTx LAN Long Haul N/A
  • Illumination Lamp
  • Rugged and compact hand-held design
  • Fast Splice and Fast Heating
  • Simple Operation
  • Splicer is compatible with Seikoh Giken and Diamond SOCs
  • Internal battery charging
  • Available for all METRO/LAN/FTTx fibers
  • Easy maintenance
  • Easy software upgrade
  • Easily exchanged fiber holder systems
  • PC interface software
  • Auto-start
  • Improved GUI
  • Large memory
  • RoHS compliant

SlimBox™ 12-Fiber Internal Use Wall Mount Module N/A SlimBox™ 12-Fiber Internal Use Wall Mount Module N/A FTTx Indoor wall mount environment MDU N/A
  • Splice tray holds either 40 mm single fusion splice sleeves or bare planar splitters
  • Cable entries at the bottom of the enclosure
  • Multiple panels for housing adapters
  • Small size taking up minimal wall space
  • Formed in plastic with high mechanical resistance providing protection for splices and terminations
  • Can be installed in any vertical plan surface easily reducing installation time

SlimBox---12-Fiber---opened
SlimBox™ 4-Fiber Internal Use Rosette Module N/A SlimBox™ 4-Fiber Internal Use Rosette Module N/A FTTx Indoor wall mount environment MDU N/A
  • Allows termination of an optical cable using direct connectorization or splice (fusion or mechanical) to optical extensions (pig tails) of 2 optical fibers (without the tray)
  • Optional splice tray with reduced dimensions design to accommodate up to four G.657A (Bend-Insensitive) fibers or optical splitters
  • Up to 02 optical adapters (SC type) can be placed in the module
  • Foru cable access: 02 in the bottom/ 01 superior/ 01 at the right side and 01 in the back (from the wall)
  • Compatible to 4"x2" boxes
  • Reduced dimensions
  • Discrete
  • Easy to handle - articulated parts; removable piece to fix the cable; internal fiber guides
  • Can be installed in any vertical plane surface
  • Formed in plastic with high mechanical resistance and efficient design
  • Large space for fiber slack inside the product
  • Allows to accommodate splice protectors (40 mm), or mechanical splices
  • Identification label in the front cover

SlimBox 4-Fiber Rosette - open
SlimBox™ Customer Splice Point (CSP) Internal and External Modules N/A SlimBox™ Customer Splice Point (CSP) Internal and External Modules N/A FTTx Indoor/Outdoor wall mount environment MDU N/A
  • Small and inconspicuous footprint
  • Common installation methods and procedures for both indoor and outdoor units
  • Version as small as 6.5" (164.41 mm) length x 3.9" (99.1 mm) height x 1.23" (31.35 mm) depth
  • Large space for slack storage
  • Available in white (indoor) and gray (outdoor). The outdoor version features a sealed cover
  • Accommodates most common fiber optic drop cable sizes including 900 µm, 3.0 mm, 4.8 mm, and flat drop cables

CSP-Box-Open
SlimBox™ Drop System N/A SlimBox™ Drop System N/A FTTx MDU N/A
  • Plug-and-Play subscriber connections with factory connectorized drop assemblies
  • Standard SC-APC Connectors
  • One terminal part number supports up to 16 drop connections with Factory Terminated or Field Installed Mechanical Connectors, or fusion splicing
  • OFS AllWave® FLEX+ Fiber standard in all drop, pigtail, and tether assemblies
  • Mid-span splicing into distribution cable
  • 1 x 16 or two 1 x 8 splitters available; factory or field installable in terminal
  • Labelling on inside of door
  • Fast subscriber connections without need for fusion splice equipment
  • Non-proprietary connector system. Easy to clean with standard cleaning kits. No O-ring seals to fail. Simple push-on installation
  • Reduced Inventory. Fast and easy craft learning process working with one vs. multiple terminals
  • Low bending loss for improved system performance and/or increased safety margins
  • Supports variety of drop installation needs
  • Sharp unmanaged bends with negligible loss for fast installations where space is at a premium. May eliminate outdoor transition box and connection by placing a cable into residence and connecting directly to Indoor ONT
  • Avoids need for additional splice closure required by proprietary hardened connector systems
  • Low cost - PON splitter and drop cable connection functionality from a single terminal
  • Easy subscriber identification helping to enable accurate moves, adds, and changes

TriBox™ Fiber Management Unit N/A TriBox™ Fiber Management Unit N/A FTTx MDU N/A
  • Physical Specifications: 23.5" W x 13" H x 12" D
  • 40 lbs Empty Weight
  • 61 lbs Shipping Weight in Crate
  • Rolled Steel Structure
  • Powder Coated Paint
  • Common Key Lock Set
  • Outdoor/Indoor Fiber Management
  • Angled Door Structure
  • Dual Door Access, Key Lock Door
  • Up to 144 SC or LC Terminations
  • Up to 144 3.0 mm Fiber Jumpers
  • Splice & Splitter Management
  • Wall or Pole Mount
  • Removable inner and outer doors
  • Bi-Directional Mounting
  • Integrated Grounding Stud
  • Removable Outer Shingle
  • UL Listed, NEMA 3R, 12 & 13

V-Linx™ Combiner N/A V-Linx™ Combiner N/A FTTx Indoor wall mount environment MDU N/A
  • Compact size
  • Supports aggregation of up to 72 units (60 units most common)
  • Uses multi-fiber connector interface
  • Integrated with V-Linx Cables at the factory
  • Field integration of V-Linx Cables optional

Combiner
V-Linx™ Fiber Distribution Hub N/A V-Linx™ Fiber Distribution Hub N/A FTTx Indoor wall mount environment MDU N/A
  • Design enabled by AllWave® FLEX ZWP Fiber
  • Uses compact PLC Splitter technology
  • Quick provisioning of circuits with SCA connectors
  • Minimal cable management from use of optimized splitter cable lengths

FDH
V-Linx™ Indoor & Outdoor Terminal N/A V-Linx™ Indoor & Outdoor Terminal N/A Indoor/Outdoor wall mount environment N/A
  • Hands-free fiber pay-off operation
  • Integrated spool axle for fiber storage
  • Spool and Play functionality from the factory
  • 50 feet (15.24 meters) of integrated cable (a larger V-Linx™ Terminal is available for 300 feet (91 meters) applications)
  • Parking adapters for units not in service
  • Wall mountable onto multiple surfaces
  • Highly compact design
  • AllWave® FLEX ZWP Single-mode Fiber enabled design
  • Under area splice cable

V-Linx-EZ-Spool-Terminal
1 - 25 of 25 | Results Per Page | View |
1