• Ytterbium Doped Optical Fiber
The single-mode core of this fiber is doped with ytterbium. It is then surrounded by a silica cladding and covered with a low-index protective coating. The resulting double clad fiber is used for single-mode fiber lasers and amplifiers operating in the 1040 to 1200 nm range.

The fiber enables fiber lasers and amplifiers with good beam profile characteristics, high wall plug efficiencies, compact footprints, superior reliability, and maintenance-free operation. It also accommodates high energies during pulsed operation and at high repetition rates.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Item Name

Core Numerical Aperture

Core Diameter

Mode Field Diameter

Proof Test Level

Typical Mode Field Diameter %40 1070 nm

Typical Mode Field Diameter @ 1070 nm

Higher Order Mode Bend Loss @Ø24 cm

Sort by
40906 N/A Ytterbium Doped Fiber for YbDF320-PM EC Fiber Lasers N/A 0.23 ± 0.02 N/A N/A @ 1000 nm, 3.6 µm N/A 2% 200 kpsi N/A N/A N/A
40908 N/A Ytterbium Doped Fiber for YbDF350 Fiber Lasers N/A 0.23 ± 0.02 N/A N/A @ 1000 nm, 3.6 µm N/A 2% 200 kpsi N/A N/A N/A
78756 N/A Yb 130 Cladding Pumped Fiber N/A 0.12 N/A N/A @ 1060 nm, 6 µm N/A 100 kpsi0.689 GPa N/A N/A N/A
79539 N/A TrueLase™ 12-250 Active LMA Optical Fiber N/A 0.070 ± 0.005 N/A N/A LP01 @ 1070nm 12 ± 0.8 µm N/A 100 kpsi N/A N/A N/A
79541 N/A TrueLase™ 10-130 Active LMA Optical Fiber N/A 0.075 ± 0.005 N/A N/A LP01 @ 1070nm 11 ± 0.8 µm N/A 100 kpsi N/A N/A N/A
85720 N/A TrueLase™ YB16-250 Active LMA Optical Fiber N/A N/A 16.5 µm N/A N/A 100 kpsi N/A N/A 15 µm N/A ≥ 40 dB/m
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1